• <meter id="fnefa"></meter>

        ʤ

        TIRE SCHOOL
        How to make tires
        Tire Specification
        Tire Components
        Off-The-Road Tire
        Tips
        Tire's New Policy
        LI, SI & LR
        ST(Special Trailer) tires
        How to Measure A Wheel

        Home >> Tire School >>  Tire Specification

        Tire Specification


        01    Brand of the tire - e.g. TNR.
        02    Tire pattern. e.g. ZT176.
        03    Tire size - The width of the tread expressed in millimeters, e.g. 205; the aspect ratio - height of the tire's sidewall as a percentage of the width, e.g. 55%; 
                 and the diameter of the tire's centre hole, (in inches) e.g. 16". The letter between the numbers is the type of construction i.e. R' Radial. e.g. 205/55R16.
        04    Service description - in this example the figure 91 denotes the maximum weight capacity of the tire according to the official load index table, which translates 
                 to 615 Kg, The letter V indicates the speed rating of the tire, in this case the tire suitable for cars capable of reaching a maximum vehicle speed of 149.1 mph.
        05    ECE (Economic Commission for Europe) Regulation 30 Conformity Approval Number - which means that the tire meets the standards of the European 
                 Regulatory Authorities.
        06    EEC Noise Approval Number, which means that the noise generated by the tire is within approved European limits.
        07    DOT Number - USA Department of Transport manufacturer's code.
        08    Date of manufacture. This is important as the age of a tire can affect its performance. The first 2 numbers refer to the week and the 3rd and 4th numbers
                 refer 
        to the year.
        09    USA UTQG (Uniform Tire Quality Grade) ratings.
        10    USA maximum tire loading.
        11    USA maximum tire inflation pressure.
        12    Denotes tubeless type, the other types of the tires will be tube type and solid tire.
        13    Safety warning refers to the dangers of under-inflation/overloading and the mounting of tires together with the risk of severe over - inflation.
        14    Direction of rotation which relates to directional tires only.
        15    Outer/inner sidewall refers to the mounting of asymmetric tires only. These tires have different tread patterns on their inner and outer sides, offering
                 improved 
        performance, and must be fitted correctly.
        16    Extra load version if applicable.
        17    TWI indicates the location of the tread wear indicators, which are raised areas at the base of the tread to serve as a visual warning that the tire is
                approaching 
        or at the minimum legal tread depth.

        TOP PRODUCTS DOWNLOAD MERCHANDISE CERTIFICATES SERVICE & WARRANTY

        Copyright © 2005 -2015 http://www.bp4cg.com All Rights Reserved

        ʤ